Home > Windows 7 > Ponyprog Error 25

Ponyprog Error 25


In case of a preproduction device just select "Ignore". 2.4.2 Read Program (FLASH) This command is available only for splitted Program/Data devices. Luiz Torres 6,426 views 24:47 Programming an AVR Microcontroller - Duration: 4:32. If you want to use JDM interface to program 24Cxx devices you have to connect pin 7 of the 24Cxx to GND (schematics are wrong). Watch Queue Queue __count__/__total__ Find out whyClose How to work with ponyprog pozior4eto SubscribeSubscribedUnsubscribe33 Loading... weblink

PonyProg detect a 24C04 eeprom and the content is the sum of the two 24C02 eeproms. However I strongly suggest to use the buffered and safer "Avr ISP" interface above, especially for ISP, since the buffer go in Hi-Z state after programming. 2.6.2 Calibration Calibration tunes the On Windows2000/XP you have to select "AVR ISP I/O" and use a standard PC LPT port. Loading...

Ponyprog Serial Programmer

Member Posts: 47 Helpful? 1 Error from PonyProg - Bus busy or Hardware Error(-11) - Solved « on: March 18, 2010, 04:06:42 AM » Hi all, I had made this 50$ When finished PonyProg exit. Uploaded on Oct 24, 2011I show you How to work with ponyprogif you have questions write downDownload the program : http:--www.lancos.com-ppwin95.html Category Science & Technology License Standard YouTube License Show more Finally a dialog box showing the result of the operation appears.

Options:Reply•Quote Return to LancOS. The system returned: (22) Invalid argument The remote host or network may be down. SEO by vBSEO ©2011, Crawlability, Inc. --[[ ]]-- Society of Robots - Robot Forum | Robot Tutorials | FAQ | Welcome, Guest. Ponyprog For Windows 7 64 Bit Free Download Socket Power (*) Menu Label AT93C46 8/16bit 93Cx6 Ext/Int MicroWire 16 -> 9346 AT93C46W 8/16bit 93Cx6 Ext/Int MicroWire 16 -> 9346 AT93C46R 8/16bit 93Cx6X Ext/Int MicroWire 16 -> 9346 AT93C46A 16bit

The file to load may have one of these format: intel-hex, motorola S-record or raw binary. 2.1.5 Save Device File Save the content of current window buffer to a file. If no argument is specified a dialog ask for these values. Re: Error from PonyProg - Bus busy or Hardware Error(-11) - Solved « Reply #9 on: March 18, 2010, 02:33:03 PM » your welcome, were here to help Logged Innovation is Re: Error from PonyProg - Bus busy or Hardware Error(-11) « Reply #6 on: March 18, 2010, 11:21:57 AM » unlikely, but if you want do a computer restart and re-install

At the moment it supports IC Bus, Microwire, SPI eeprom, the Atmel AVR and Microchip PIC micro. Ponyprog Usb Then select the COM port you use. Set startup to boot. The buffer is splitted in two different part for these devices: the first part for program memory and the second part for data memory.

Ponyprog Download

To use the "Avr ISP I/O" with Linux you need to run PonyProg as root. can u show same type of help for serial i am using DB9 connector for communication 16th April 2014,18:11 #19 ANS HAFEEZ Full Member level 1 Join Date Jul 2013 Location Ponyprog Serial Programmer It works with all devices supported by PonyProg. Ponyprog Windows 7 The .bin format is raw binary format, it's commonly used to export the file to other programs. 2.1.7 Save Program (FLASH) File This command is available only for splitted Program/Data devices.

You can select the file to open through a dialog. Some devices uses 16bit word so you can represent it in both ways depending on your needs. If you want to stop the current write just press the "Abort" button. Gana Gana 1,214 views 1:58 Lecture 36 ROM-EPROM,EEPROM and Flash EPROM - Duration: 40:00. Ponyprog Eeprom Programmer

Also, is this the only reason for this error to pop up? Originally Posted by BLAZE25 someone told us that atmega128 is lock so that cannot program with ponyprog,he suggest that use HIGH VOLTAGE AVR programmer but its expensive,but my friend in manila I'm shocked, because I didn't got error message. issue has been resolved.

On Windows2000/XP you have to select "AVR ISP I/O" and use a standard PC LPT port. Pony-pong Free Download Its purpose is reading and writing every serial device. I'd like to add that I load the DLPORTIO.SYS driver.

All the considerations for "Avr ISP" above are valid for "EasyI2CBus" too.

This command save the content of current window buffer data memory to a file. praveen_khm Jr. After the write operation an automatic verify is executed. Si-prog AVR ISP Parallel port interface select "parallel" check-box and choose "Avr ISP API" or "Avr ISP I/O" in the combo-box.

Atmel Microwire (3-wire) Serial eeprom Part Code Org. If you are interested in making a serial programmer (let me assure you it's the best simplest design i've got and it works great) check this out... The organization is selected with a pin connected to VCC or GND. In the bottom of the dialog box you can select the file format for the file to save (indicated by the extension).

A bank is a cluster of 256 bytes for the 24xx and a word for other devices. The osc_index argument specify which calibration value should be read since some AVR have several oscillator frequencies. This may happen in three cases: your COM port don't provide enaugh current the device sink too much current (i.e. This dialog is especially useful for microcontrollers, because they could not work at all without set these bits in a correct way.

Some AVR devices have EESAVE fuse bit, when programmed the EEPROM is preserved during a flash erase. 2.4.7 Write Data (EEPROM) This command is available only for splitted Program/Data devices. Logged Robot building is all about sharing and learning-------------------------------------------www.robotplatform.com : Beginners guide to Electronics & Robotics dellagd Contest Winner Supreme Robot Posts: 731 Helpful? 5 Come to the dark side... In some case uou can't replace a "roll-over eeprom" with a "no roll-over eeprom". The first time you run the program remember to select the interface and port you use with the Setup.

Member Posts: 10 Helpful? 0 Re: Error from PonyProg - Bus busy or Hardware Error(-11) - Solved « Reply #12 on: June 19, 2012, 07:34:17 PM » That worked. Connect the adapter to main board observing polarity. In the case ofAVR device selected, the program can report the message "Device locked" in case of the locked bits was programmed. Because its not possible to disable serial programming by changing fuse, there is no provision to disable serial programming with ISP.

If no name has been specified it works like Save as. 2.1.6 Save Device File As Open a dialog box where you can specify the name of the file. READ-FUSE READ-LOCK Description: READ-FUSE read the fuse bits (device dependant) and open the fuse and lock bits dialog READ-LOCK read the lock bits (device dependant) and open the fuse and lock The SCK pin used for ISP is PB1. The 24C01 can be readed but not writed, you can read it as a 2402 or 24XX Auto device.

You can CUT & PASTE in the text entry dialog by the use of the right mouse button. Hi Blaze25, When I made a serial programmer and used it with Pony Prog I got the same problem and the reason was "Not connected power pin" which requires 5.0-5.25V power