Home > Post Error > Post Error 1779-drive Array Controller

Post Error 1779-drive Array Controller

Contents

Once in the OS, I was able to access the Array Configuration Utility to "delete" the RAID10 configuration. Audible Beeps: None Possible Cause: More drives failed (or were replaced) than the fault-tolerance level allows. Showing results for  Search instead for  Do you mean  Menu Categories Solutions IT Transformation Internet of Things Topics Big Data Cloud Security Infrastructure Strategy and Technology Products Cloud Integrated Systems Networking Boot up the server At this point, I get the following error: 1785-Slot 0 Drive Array Not Configured Drive positions appear to have changed. http://exactcomputerrepair.com/post-error/post-error-1779-drive-array-controller-detects-replacement-drives.html

Other causes can be backplane / cable resetting the connectivity and causing a drive rebuild (POST 1778), or cause the controller to report that the logical drives are not detected (POST Did Bard ride the cart in the novel? Which answer best completes the sequence? I've had great experiences with 3ware controllers in situations like this. https://community.hpe.com/t5/ProLiant-Servers-ML-DL-SL/POST-Error/td-p/4120534

Post Error 1778-drive Array Resuming Automatic Data Recovery Process

I had assumed that the RAID metadata stored on the disks would be sufficient to bring the old RAID array back online, but that doesn't seem to be the case. Word for nemesis that does not refer to a person Xbox saving for Rainbow Six data Will majority of population dismiss a video of fight between two supernatural beings? By using this site, you accept the Terms of Use and Rules of Participation. End of content United StatesHewlett Packard Enterprise International CorporateCorporateAccessibilityCareersContact UsCorporate ResponsibilityEventsHewlett Packard LabsInvestor RelationsLeadershipNewsroomSitemapPartnersPartnersFind a PartnerPartner Community ProLiant Servers (ML,DL,SL) CommunityCategoryBoardUsers turn on suggestions Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as

no more errors and officially back in action. I'm afraid their is no other option than recreating the logical drive Was the post useful? HP Proliant Integrated Management Log Viewer: Drive Array Device Failure (Slot 1, Bus 2, Bay 4)Drive Array Device Failure (Slot 1, Bus 2, Bay 1)Post Error: 1792-Drive Array Reports Valid Data All worked fine, without needed any reboot.

What is a good antonym for "commiserate"? Select "f2" To Accept Data Loss And To Re-enable Logical Drive(s) Community ProLiant Servers (ML,DL,SL) CommunityCategoryBoardUsers turn on suggestions Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as RegCure worked like a charm on the first try. https://h20565.www2.hpe.com/hpsc/doc/public/display?sp4ts.oid=3884323&docLocale=en_US&docId=emr_na-c02887120 Please try the request again.

This server (our file server) needed an upgrade. Try this. I have already contacted HP support, and they were unable to help. more stack exchange communities company blog Stack Exchange Inbox Reputation and Badges sign up log in tour help Tour Start here for a quick overview of the site Help Center Detailed

Select "f2" To Accept Data Loss And To Re-enable Logical Drive(s)

The 3ware (tw_cli) utility is much more user friendly than either the HP (hpacucli) or the LSI (MegaMgr/MegaCLI) utility. (It should be noted that LSI bought 3ware last year. asked 5 years ago viewed 96109 times active 5 months ago Related 2HP ProLiant server - multiple raid controllers?2Smart Array P600: Can't get drives recognized on port 2i4Slow parity initialization of Post Error 1778-drive Array Resuming Automatic Data Recovery Process Join them; it only takes a minute: Sign up Here's how it works: Anybody can ask a question Anybody can answer The best answers are voted up and rise to the I can hardly believe that the drives would be rendered inaccessible as soon as they are removed from the original RAID controller.

Showing results for  Search instead for  Do you mean  Menu Categories Solutions IT Transformation Internet of Things Topics Big Data Cloud Security Infrastructure Strategy and Technology Products Cloud Integrated Systems Networking check my blog so only option that you have is to press F2 to continue."Select "F2" to accept data loss and to re-enable logical drive(s)"Note: Data which is there in the cache and not By using this site, you accept the Terms of Use and Rules of Participation. End of content United StatesHewlett Packard Enterprise International CorporateCorporateAccessibilityCareersContact UsCorporate ResponsibilityEventsHewlett Packard LabsInvestor RelationsLeadershipNewsroomSitemapPartnersPartnersFind a PartnerPartner Lebesgue outer measure What is the correct phraseology for declaring a fuel emergency?

That seems pretty high, so it must reserve some for other things.I'd try swapping the drive with it's replacement again. Run Array Diagnostics Utility (ADU) if previous positions are unknown. When you went to step #3 in the first drive replacement process; Boot up the server and acknowledge errors about failed drives, did you DELETE the removed array/logical drive or just this content Delete the array.

I'm not a PC guru by any stretch, but this was a godsend. Insert your new drives. But some data was missed in the last backup, so I need to recover data from the drives in the original array.

Here's what I've done: Shut down server Remove drives used in new RAID10 array Insert old drives according to position labels.

Recently two of the harddisk failed. Will try back it up though.Cheers 0 Kudos Reply PGTRI Honored Contributor Options Mark as New Bookmark Subscribe Subscribe to RSS Feed Highlight Print Email to a Friend Report Inappropriate Content and found the solution in SCSI Cable.I replace the scsi cable, and everything gets smooth. 0 Kudos Reply miuser Occasional Visitor Options Mark as New Bookmark Subscribe Subscribe to RSS Feed Cheers!

Community ProLiant Servers (ML,DL,SL) CommunityCategoryBoardUsers turn on suggestions Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as Then boot with your old drives and see if they're detected. NOTE: If the download link doesn't work you may need to Download it Directly from a Mirror Here. have a peek at these guys Internet can help. . ©2014 All Rights Reserved Windows Ncp Vpn Error 4021 | Windows Microsoft Visual C++ Runtime Error 6025 | Windows Pro Tools Dae Error 7400 Waves | Windows

So, from my experience, If you received a Windows Post Error: 1779-drive Array Controller Detects Replacement Drives message then there is a 97.5% chance that your computer has registry problems. Array A says RAID 1, Array B says RAID 5.Update those firmwares (you'll need to reboot) and then see how things look. share|improve this answer answered Feb 6 '11 at 0:05 Nic 7,255124084 add a comment| up vote 0 down vote If not, which RAID controllers support this, so I know what to